Techno Press

Home

Editor-in-Chief
Prof. Panagiotis G. Asteris

    Computational Mech. Lab.
    School of Pedagogical & Technol. Education
    Athens, Greece

Associate Editor
Dr. Danial J. Armaghani

     Dept. of Civil Eng.
     Faculty of Eng., Univ. of Malaya
     Kuala Lumpur, Malaysia

Managing Editor
Prof. Chang-Koon Choi

Korea Adv. Inst. of Sci. & Technol.
Daejeon 34141, Korea

ISSN: 2713-5519(Print) ISSN: 2733-8053(Online)

Vol.1 (4 issues) for 2022, Quarterly

Aims and Scope The focus of Metaheuristic Computing and Applications (MCA) journal is on the development and application of computational algorithms, methods and techniques for solving problems in the fields of engineering. The areas covered by MCA journal include, but not limited to, multidisciplinary research in:
I. Artificial neural Networks(ANNs) III. Computational Biology/Bioinformatics V. Computational Science and Engineering VII. Evolutionary multimodal optimization IX. Fuzzy set theory and hybrid fuzzy models XI. Genetic algorithm and genetic programming XIII. Hybrid intelligent systems		II. Computational Biology/Bioinfomatics IV. Machine Learning Techniques VI. Multicriteria decision making (MCDM) VIII. Multiexpression programmingn X. Multivariate adaptive regression splines (MARS) XII. Neural networks and deep neural networks XIV. Optimization algorithms [structural optimization; topology optimization]

Editorial Board
Dr. Amir H. Alavi Department of Civil and Environmental Engineering, University of Pittsburgh USA Prof. Amir H. Gandomi Faculty of Engineering & Information Technology, University of Technology Sydney Australia Dr. Binh Thai Pham University of Transport Technology, Ha Noi Viet Nam Dr. Dieu Tien Bui University of South-Eastern Norway Norway Dr. Gai-Ge Wang Department of Computer Science and Technology Ocean University of China China Dr. Hossein Nezamabadi-pour Shahid Bahonar University of Kerman Iran Dr. Jian Zhou School of Resources and Safety Engineering, Central South University China	Dr. Liborio Cavaleri Department of Civil, Environmental, Aerospace and Materials Engineering (DICAM), University of Palermo, Viale delle Scienze, 90128 Palermo Italy Dr. Łukasz Sadowski Faculty of Civil Engineering, Wrocław University of Science and Technology Poland Dr. Mahdi Shariati University of Malaya Malaysia Dr. Manoj Khandelwal Faculty of Science and Technology, Federation University Australia, PO Box 663, Ballarat, VIC 3353, Australia Dr. Mahdi Hasanipanah University of Kashan, Kashan Iran Dr. Ozgur Kisi Ilia State University Georgia	Dr. Masoud Monjezi Tarbiat Modares University Tehran, Iran Dr. Mohsen Hajihassani Urmia University, Urmia, Iran Dr. Nagesh Kumar Indian Institute of Science India Dr. Pijush Samui National Institute of Technology Patna Patna, India Dr. Paulo Davim Department of Mechanical Engineering, University of Aveiro, Portugal Dr. Trilok Nath Singh Indian Institute of Technology Bombay, India

Introductions to Authors (Last updated: Oct 25, 2021)

Introduction: This Instruction to Authors is to provide help for authors who wish to submit their papers in the "Metaheuristic Computing and Applications", A multi-disciplinary journal in computational engineering.

1. Submission of the paper

Authors are asked to submit their manuscripts in PDF format(or Latex) electronically through the "Techno-Press Manuscript Upload System"(TeMUS) (http://www.techno-press.com/papers). If you have difficulties in using TeMUS, please contact us at [[email protected]]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author, which may be conveniently used to check the review status of submitted papers.

2. Preparation of the manuscript

General : The manuscripts should be in English and typed with double(or single) column and single line spacing on single side of A4 paper. The submitted papers will be published in the category of regular technical papers only. The first page of a paper should contain: (1) a title of paper which well reflects the contents of the paper (Arial, 15pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 11pt), (3) an abstract of 100~250 words (Times New Roman, 9.5pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and e-mail address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 8-16 journal pages (double column format). Please refer to the Authors' Guide(A) and the Template(A) for the format of the paper: Authors' Guide(A): http://www.techno-press.com/papers/Guide(A).pdf .
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2, etc.). Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures and tables are required to be placed at the suitable location in the text. It is recommended that a figure or a table does not occupy both columns whenever possible
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow The International System of Units (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1) - (2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and later versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introductions and the sample list in the Authors' Guide(A).

3. Review

All the submitted papers that have passed the preliminary check by the manuscript editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the “Metaheuristic Computing and Applications”, An International Journal.

4. Proofs

Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright

Submission of an article to the “Metaheuristic Computing and Applications”, An International Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics

Techno-Press applies research and publication ethics standards based on COPE’s International Standards for Editors and Authors. Violation of publication ethics is shown in the COPE flow chart. (https://publicationethics.org/guidance/Flowcharts, For authorship problems: https://publicationethics.org/authorship)

7. Open Access

There is an option of publishing your paper as Open Access. When you receive a formal acceptance email, you will find a link that you may click on to pay the Article Processing Charge (APC) for Open Access publishing.

Table of Contents.


		2020 Volume 1 No. 1	No.2

Subscription

2021 Subscription Rates

USD
Metaheuristic Computing and Applications Volume 2 ( issues)	Print +e		Online +c		Airmail*
Institutional Subscription		320		OA	+35

Orders are accepted by calendar year only.

1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
3. Personal Subscription Rates : Please inquire at [email protected].

Research and Publication Ethics

All the editors, publishers, researchers, and peer reviewers of Techno-Press journals strongly encourage to carefully review and follow the Committee on Publication Ethics (COPE) guidelines:
https://publicationethics.org/guidance/Guidelines.

1. Authorship

Authorship credit should be based on
    (1) Substantial contributors to the conception or design of the work or the acquisition, analysis
   or interpretation of data for the work,
    (2) Drafting the work or revising it critically for important intellectual content,
    (3) Final approval of the version to be published, and
    (4) Agreement to be accountable for all aspects of the work in ensuring that questions related
   to the accuracy or integrity of any part of the work are appropriately investigated and resolved.
Authors should meet these four conditions after the initial submission of a manuscript and any changes whatsoever in authorship (adding author(s), deleting author(s), or re-arranging the order of authors) must be explained by a letter to the editor from the authors concerned. This letter must be signed by all authors on the paper. Techno-Press does not correct authorship after the final acceptance unless a mistake has been made by the editorial staff. Authorship may be changed before the final acceptance when the authorship correction is requested by all of the authors involved with the manuscript. The corresponding author takes primary responsibility for communication with the journal during the manuscript submission, peer review, and publication process. The corresponding author should be available throughout the submission and peer review process to respond to editorial queries in a timely manner, and should be available to respond to critiques of the work and cooperate with any requests from the journal for data or additional information or questions about the paper even after publication.

2. Originality, plagiarism and duplicate publication

Submitted manuscripts must not have been previously published or be under consideration for publication elsewhere. No part of the accepted manuscript should be duplicated in any other journal without the permission of the Editorial Board. Submitted manuscripts are checked for possible plagiarism or duplicate publication upon the paper's arrival. If plagiarism or duplicate publication is detected, the manuscripts may be rejected, the authors will be announced in the journal, and their institutions will be informed. There will also be penalties for the authors. A letter of permission is required for any and all material that has been published previously. It is the responsibility of the author to request permission from the publisher for any material that is being reproduced. This requirement applies to text, figures, and tables.

3. Conflict of interest statement

The corresponding author must inform the editor of any potential conflicts of interest that could influence the authors' interpretation of the data. Examples of potential conflicts of interest are financial support from or connections to companies, political pressure from interest groups, and academically related issues. In particular, all sources of funding applicable to the study should be explicitly stated.

4. Process for managing research and publication misconduct

When the journal faces suspected cases of research and publication misconduct, such as redundant publication, plagiarism, fraudulent or fabricated data, changes in authorship, undisclosed conflict of interest, ethical problems with a submitted manuscript, appropriation by a reviewer of an author's idea or data, and complaints against editors, the resolution process will follow the flowchart provided by COPE, https://publicationethics.org/guidance/Flowcharts.
The discussion and decision on the suspected cases are carried out by the Editorial Board.

5. Editorial responsibilities

The Editorial Board will continuously work to monitor and safeguard publication ethics:
* Guidelines for retracting articles;
* Maintenance of the integrity of academic records;
* Preclusion of business needs from compromising intellectual and ethical standards;
* Publishing corrections, clarifications, retractions, and apologies when needed; and
* Excluding plagiarized and fraudulent data.
The editors maintain the following responsibilities:
* Responsibility and authority to reject and accept articles;
* Avoid any conflict of interest with respect to articles they reject or accept;
* Promote the publication of corrections or retractions when errors are found; and
* Preserve the anonymity of reviewers.

\| Home \| Aims and Scope \| Editorial Board \| Table of Contents \| Guide to Authors \| Ethics \|